This Merritt Island project started with a walkway around the pool and grew into a full front and back yard rebuild. We laid a new paver driveway down a long lot, finished the bare dirt behind the breezeway, built lit front steps and raised planters, and fixed a grading problem that was sending rainwater toward the house. The whole job took about two weeks.
The first request was a walkway around the pool. Behind the breezeway sat a dirt area they wanted to look finished, and they hadn’t settled on a material yet. Once we’d walked the property together, the plan grew to cover the driveway, the front entry and the drainage. We settled on gray Titanium pavers with darker Slate walls and steps to suit the house.
The house sits well back from the road, so the new paver driveway is long and curves around the mature oaks in the front yard. A drive that long needs careful grading: every section has to shed water off the pavers and away from the house.
We used Belgard Catalina Grana in Titanium, a cool gray blend that suits the home’s white board-and-batten siding and dark trim. The same paver continues into the patio and walkways, so the driveway, entry and backyard read as one design.
The biggest challenge was in the ground itself. The existing grade sent rainwater toward the house, a real risk on Merritt Island, where a summer storm can drop a lot of water fast. We regraded the yard so water now drains away from the foundation.
Getting the grade right meant moving existing hardscape walls and reworking the layout. It’s more work up front, and it’s the fix that lasts. Pavers laid over a bad grade just move the problem somewhere else.
The house sits above the yard, so wide steps now climb from the lawn to the front door. They’re built from Belgard Easton Stone Grana in Slate, with a Tru-Scapes fixture set into every tread to mark the path at night. Our landscape lighting page covers how we plan fixtures like these.
Around the entry and the breezeway, Castle Manor walls in Slate form raised planters with lights tucked under the caps. They hold the soil where the grade changes and give the plantings a clean edge.
Out back, a paver walkway now runs along the pool enclosure, and the bare dirt behind the breezeway is now finished in the same pavers. Seville coping in Titanium matches the pavers, so the pool edge and walkway look like one surface. Planning something similar? Our pool deck pavers page covers materials and options in more detail.
“The planning and preparation married with a phenomenal work ethic and unequalled craftsmanship make each day of this unfolding effort more enjoyable than the last.”
Homeowner, Merritt Island, from their Google review
In most yards, yes. On this lot we reshaped the grade and moved walls so rain drains away from the foundation, then laid pavers over the corrected base. We’ll check your grade and where the water goes on the first visit.
This one, with the driveway, steps, planters, walkway and patio, took about two weeks.
No. These homeowners hadn’t chosen a material when they called. We bring samples, look at your house and yard, and help you narrow it down.
Long lots, sloped yards and water heading the wrong way are common across Brevard County. We’ll walk your property, check the grade and show you a layout that fixes drainage first and looks good on top of it. See more finished work in our project portfolio.
Call 321-704-3943 or request your free quote, and we’ll set up a free design consultation at your home.